Tel:+1818 546 1380  | Fax:+1818 546 1383 support@bhg.us.com

High Density Green Plastic Sheeting!

Key Features of the hydraBOND® Plastic Sheeting:

 

  • High Density, Clear, Durable Film
  • Works Great with Waterborne Paint!
  • Tear-Resistant
  • Specially Corona Treated For Exceptional Paint Overspray Adhesion
  • Grips Well To The Automobile
  • Center Printing Helps With Alignment
  • Available In 12′ x 400′ And 16′ x 350′ Widths

Competition

 

  • Evercoat Plastic Sheeting
  • 3M Plastic Sheeting
  • Norton Overspray Plastic Sheeting

 HB12400 12’X 400′ hydraBOND® GREEN PLASTIC

72 ROLLS/PALLET WT: 864 Lbs (392kg), Dim.: 46″x46″

 

hydraBOND® High Density Green Plastic Sheeting! Works Great with Waterborne Paint!

Shield your vehicle from paint bleed-through and overspray during the painting process with hydraBOND® Plastic Sheeting. I

t is a high-density, translucent green polypropylene film that clings to the vehicle and stays intact.

This film is used to protect the vehicles from paints, primers, and clearcoats applied during the automobile repair process.

This plastic sheeting has undergone a special Corona treatment to take care of adhesion of both waterborne and solvent paints. It is resistant to tear and grips to the vehicle surface for easy handling.

Paint masking is quick and easy with this plastic sheeting.

The material is easy to handle, permitting covering of the vehicle by one person only. It resists paint flaking, and there is no need for masking paper at the critical paint edge, saving masking time and material cost. It is available in two width sizes – 12 feet and 16 feet.

The twelve foot width fits small to mid-size vehicles and the sixteen foot width is good for accommodating mini-vans, larger sedans, SUVs, and small pick up trucks.

Points to keep in mind while using thehydraBOND® High Density Green Plastic Sheeting!:

  • Make sure the vehicle surface is completely dry before you cover it with plastic.
  • Any moisture trapped under the film can lead to ghosting in the paint of the vehicle.
  • Keep the “Paint This Side” up.
  • The sheeting features printing along the film center to enable easy identification of the paintable side.
  • Do not use this sheeting to cover fresh finishes i.e. paints and clearcoats less than 30 days old.
  • In case you are using the sheeting on freshly painted surfaces, remove it as soon as possible and before the bake cycle. Tie or mask loose ends of the sheeting to prevent clearcoat overspray blowing up under the sheeting.

Key Features of the hydraBOND® Plastic Sheeting:

  • High Density, Clear, Durable Film Tear-Resistant Specially Corona Treated For Exceptional Paint Overspray Adhesion Grips Well To The Automobile Center Printing Helps With Alignment Available In 12′ And 16′ Widths

Technical Specifications Temperature Use Range: Up to 225º F (107º C) for up to 1 hour Tensile (Machine Direction): 3000 psi minimum Tensile (Transverse Direction): 2000 psi minimum Elongation (Machine Direction): 100% minimum Elongation (Transverse Direction): 250% minimum See the Technical Data Sheet

Competitors

  • Evercoat Plastic Sheeting
  • 3M Plastic Sheeting
  • Norton Overspray Plastic Sheeting

See: Technical Data Sheet

HD16350 16’X 350′ White generic BOX

72 ROLLS/PALLET WT: 960 Lbs (435 kg), Dim.: 46″x46″ hydraBOND®

 

hydraBOND® High Density Green Plastic Sheeting! Works Great with Waterborne Paint!

Shield your vehicle from paint bleed-through and overspray during the painting process with hydraBOND® Plastic Sheeting. I

t is a high-density, translucent green polypropylene film that clings to the vehicle and stays intact.

This film is used to protect the vehicles from paints, primers, and clearcoats applied during the automobile repair process.

This plastic sheeting has undergone a special Corona treatment to take care of adhesion of both waterborne and solvent paints. It is resistant to tear and grips to the vehicle surface for easy handling.

Paint masking is quick and easy with this plastic sheeting.

The material is easy to handle, permitting covering of the vehicle by one person only. It resists paint flaking, and there is no need for masking paper at the critical paint edge, saving masking time and material cost. It is available in two width sizes – 12 feet and 16 feet.

The twelve foot width fits small to mid-size vehicles and the sixteen foot width is good for accommodating mini-vans, larger sedans, SUVs, and small pick up trucks.

Points to keep in mind while using thehydraBOND® High Density Green Plastic Sheeting!:

  • Make sure the vehicle surface is completely dry before you cover it with plastic.
  • Any moisture trapped under the film can lead to ghosting in the paint of the vehicle.
  • Keep the “Paint This Side” up.
  • The sheeting features printing along the film center to enable easy identification of the paintable side.
  • Do not use this sheeting to cover fresh finishes i.e. paints and clearcoats less than 30 days old.
  • In case you are using the sheeting on freshly painted surfaces, remove it as soon as possible and before the bake cycle. Tie or mask loose ends of the sheeting to prevent clearcoat overspray blowing up under the sheeting.

Key Features of the hydraBOND® Plastic Sheeting:

  • High Density, Clear, Durable Film Tear-Resistant Specially Corona Treated For Exceptional Paint Overspray Adhesion Grips Well To The Automobile Center Printing Helps With Alignment Available In 12′ And 16′ Widths

Technical Specifications Temperature Use Range: Up to 225º F (107º C) for up to 1 hour Tensile (Machine Direction): 3000 psi minimum Tensile (Transverse Direction): 2000 psi minimum Elongation (Machine Direction): 100% minimum Elongation (Transverse Direction): 250% minimum See the Technical Data Sheet

Competitors

  • Evercoat Plastic Sheeting
  • 3M Plastic Sheeting
  • Norton Overspray Plastic Sheeting

See: Technical Data Sheet

White generic BOX

HD12400 12’X 400′ White generic BOX

  • 72 ROLLS/PALLET WT: 864 Lbs (399 kg), Dim.: 46″x46″

HD16350 16’X 350′ White generic BOX

  • 72 ROLLS/PALLET WT: 960 Lbs (435 kg), Dim.: 46″x46″

High Density white Plastic Sheeting! Works Great with Waterborne Paint!

Shield your vehicle from paint bleed-through and overspray during the painting process with hydraBOND® Plastic Sheeting. I

t is a high-density, translucent green polypropylene film that clings to the vehicle and stays intact.

This film is used to protect the vehicles from paints, primers, and clearcoats applied during the automobile repair process.

This plastic sheeting has undergone a special Corona treatment to take care of adhesion of both waterborne and solvent paints. It is resistant to tear and grips to the vehicle surface for easy handling.

Paint masking is quick and easy with this plastic sheeting.

The material is easy to handle, permitting covering of the vehicle by one person only. It resists paint flaking, and there is no need for masking paper at the critical paint edge, saving masking time and material cost. It is available in two width sizes – 12 feet and 16 feet.

The twelve foot width fits small to mid-size vehicles and the sixteen foot width is good for accommodating mini-vans, larger sedans, SUVs, and small pick up trucks.

Points to keep in mind while using High Density white translucent Plastic Sheeting!:

  • Make sure the vehicle surface is completely dry before you cover it with plastic.
  • Any moisture trapped under the film can lead to ghosting in the paint of the vehicle.
  • Keep the “Paint This Side” up.
  • The sheeting features printing along the film center to enable easy identification of the paintable side.
  • Do not use this sheeting to cover fresh finishes i.e. paints and clearcoats less than 30 days old.
  • In case you are using the sheeting on freshly painted surfaces, remove it as soon as possible and before the bake cycle. Tie or mask loose ends of the sheeting to prevent clearcoat overspray blowing up under the sheeting.

Key Features of the Plastic Sheeting:

  • High Density, Clear, Durable Film Tear-Resistant Specially Corona Treated For Exceptional Paint Overspray Adhesion Grips Well To The Automobile Center Printing Helps With Alignment Available In 12′ And 16′ Widths

Technical Specifications Temperature Use Range: Up to 225º F (107º C) for up to 1 hour Tensile (Machine Direction): 3000 psi minimum Tensile (Transverse Direction): 2000 psi minimum Elongation (Machine Direction): 100% minimum Elongation (Transverse Direction): 250% minimum See the Technical Data Sheet

Competitors

  • Evercoat Plastic Sheeting
  • 3M Plastic Sheeting
  • Norton Overspray Plastic Sheeting

See: Technical Data Sheet

“Special Order” Choose Your Color Plastic Sheeting Generic White Box Plastic Sheeting!

 

30-45 Days Lead Time, (MQO) Minimum Order 5 pallets each size

AS12400 12’X 400′ White generic BOX

  • 72 ROLLS/PALLET WT: 864 Lbs (392 kg), Dim.: 46″x46″

AS16350 16’X 350′ White generic BOX

  • 72 ROLLS/PALLET WT: 960 Lbs (435 kg), Dim.: 46″x46″

AS16400 16’X 400′ White generic BOX

  • 72 ROLLS/PALLET WT: 1078 Lbs (489 kg), Dim.: 46″x46″

Works Great with Waterborne Paint!

Shield your vehicle from paint bleed-through and overspray during the painting process with hydraBOND® Plastic Sheeting. I

t is a high-density, translucent green polypropylene film that clings to the vehicle and stays intact.

This film is used to protect the vehicles from paints, primers, and clearcoats applied during the automobile repair process.

This plastic sheeting has undergone a special Corona treatment to take care of adhesion of both waterborne and solvent paints. It is resistant to tear and grips to the vehicle surface for easy handling.

Paint masking is quick and easy with this plastic sheeting.

The material is easy to handle, permitting covering of the vehicle by one person only. It resists paint flaking, and there is no need for masking paper at the critical paint edge, saving masking time and material cost. It is available in two width sizes – 12 feet and 16 feet.

The twelve foot width fits small to mid-size vehicles and the sixteen foot width is good for accommodating mini-vans, larger sedans, SUVs, and small pick up trucks.

Points to keep in mind while using High Density white translucent Plastic Sheeting!:

  • Make sure the vehicle surface is completely dry before you cover it with plastic.
  • Any moisture trapped under the film can lead to ghosting in the paint of the vehicle.
  • Keep the “Paint This Side” up.
  • The sheeting features printing along the film center to enable easy identification of the paintable side.
  • Do not use this sheeting to cover fresh finishes i.e. paints and clearcoats less than 30 days old.
  • In case you are using the sheeting on freshly painted surfaces, remove it as soon as possible and before the bake cycle. Tie or mask loose ends of the sheeting to prevent clearcoat overspray blowing up under the sheeting.

Key Features of the Plastic Sheeting:

  • High Density, Clear, Durable Film Tear-Resistant Specially Corona Treated For Exceptional Paint Overspray Adhesion Grips Well To The Automobile Center Printing Helps With Alignment Available In 12′ And 16′ Widths

Technical Specifications Temperature Use Range: Up to 225º F (107º C) for up to 1 hour Tensile (Machine Direction): 3000 psi minimum Tensile (Transverse Direction): 2000 psi minimum Elongation (Machine Direction): 100% minimum Elongation (Transverse Direction): 250% minimum See the Technical Data Sheet

Competitors

  • Evercoat Plastic Sheeting
  • 3M Plastic Sheeting
  • Norton Overspray Plastic Sheeting

See: Technical Data Sheet

Share This